HOW TO VIDEOS

We’re all about the DIY

So if you need to maintain or repair your Can-Am, watch how straightforward doing it yourself can be.

MAVERICK X3 VIDEOS

CLUTCH BELT

How to change a clutch belt (5 m 07 s): You’ll need a secondary compression tool, a Torx T30 wrench, a bolt (for the secondary compression tool), a double-sided 13 mm wrench, a flathead screwdriver, gloves and Can-Am pliers.

FRONT AXLE

How to change a front axle (8 m 35 s): You’ll need channel locks, needlenose pliers, a flathead screwdriver, a ratchet, a 15 mm end wrench, an 18 mm end wrench, a 16 mm end wrench, a 15 mm socket, an 18 mm socket, a 19 mm socket and a 30 mm socket.

BATTERY

How to change a battery (3 m 16 s): You’ll need a 18 mm socket, a 13 mm socket, a 10 mm socket and a wrench to pair with each socket.

BRAKE PADS

How to change brake pads (3 m 35 s): You’ll need a 15 mm socket, a 19 mm socket, a Torx T30 and a screwdriver (optional).

WHEEL BEARING

How to change a wheel bearing (7 m 09 s): You’ll need a 15 mm socket, an 18 mm socket, a 19 mm socket, a 6” extension, 15 mm and 18 mm wrenches, a screwdriver, a rubber hammer, a brass hammer and needlenose pliers.

SPARK PLUGS

How to change spark plugs (8 m 35 s): You’ll need a Torx T30 wrench, a 14 mm deep socket, a 6” extension and a 3/8” ratchet wrench to get the spark plugs out. To remove the exhaust out of the way before reaching the spark plugs, you’ll need a 13 mm wrench, a 13 mm socket, a rubber hose and 2 to 3 feet of wire.

DEFENDER & OUTLANDER VIDEOS

Clutch belt

How to change a clutch belt (5 m 25 s): You’ll need a Can-Am standard tool kit including the Torx T30 wrench, a 13” wrench, a 13 mm socket and the secondary compression tool.

Spark plugs

How to change spark plugs (3 m 14 s): You’ll need a 3” extension, a 6” extension, a 16 mm deep socket and a 3/8” ratchet wrench.

Battery (Defender)

How to change a battery on the Can-Am Defender (4 m 07 s): You’ll need a 10 mm socket and a 3/8” ratchet wrench.

Battery (Outlander)

How to change a battery on the Can-Am Outlander (3 m 35 s): You’ll need a 10 mm deep socket.

BRAKE PADS

How to change brake pads (4 m 18 s): You’ll need a 15 mm socket, a 17 mm socket, a screwdriver and a Torx T30 wrench.

Oil filter

How to change oil filter (3 m 38 s): You’ll need an XPS engine oil change kit, a ratchet with 2–3” extension, an 8 mm socket and a 13 mm socket.

Still haven’t found what you’re looking for?