Front Fenders Electrical Harnesses May Be Loose - Potential Loss of Power
Transport Canada Recall Number: 2022-605

Dear BRP Customer, 

 

This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person. BRP is conducting a safety recall.

 

Our records show that you own a potentially affected vehicle.

 

What is the potential problem? 

The position light and flasher electrical harness in the front fenders may be loose and rub on the tires. Over time, this could lead to a short circuit causing an engine stall while driving without the ability to restart the vehicle. If this happens, the Vehicle Stability System (VSS), which includes the Anti-Lock Braking System (ABS), will not be available. This situation may increase the risk of a crash.

 

Which models are involved?

2019 to 2021 and specific serial numbers of 2022 and 2023 Can-Am® Ryker vehicles

 

What should you do?

  • Contact immediately your authorized BRP Can-Am dealer and schedule an appointment to have the safety recall performed on your vehicle.

  • The repair is to secure the harness with proper routing in the front fenders. The procedure should take less than an hour.

  • BRP will repair your vehicle at no cost.

  • In the case of an engine stall due to a short circuit, you will maintain steering and braking but you will not be able to maintain your speed. The Vehicle Stability System (VSS), which includes the Anti-Lock Braking System (ABS), will not be available. You will not be able to restart the vehicle.

  • If you leased this vehicle:

  • Send a copy of this letter to the lessee within ten working days after the day you received this letter.

  • Do the same with any future letters about this safety recall.

 

What to do if you feel you have received this notice by mistake:

This notice was mailed to you according to the most current information we have available.

If you no longer own this vehicle or some information regarding your name or address are incorrect, please contact BRP at your earliest convenience.

Your safety and continued satisfaction with our products are a priority for us. We apologize for any inconvenience this may cause you and remain committed to facilitating the process as much as we can.

 

Thank you for your immediate attention to this matter. 

 

Sincerely,

 

BRP Customer Services Department

 

If you have questions or need assistance, or to find the nearest authorized BRP dealer:

• Visit www.brp.com

• Or call: 1-888-272-9222

  8:00 AM to 8:00 PM Eastern time 7 days a week.