How to change a clutch belt: You’ll need a secondary compression tool, a Torx T30 wrench, a bolt (for the secondary compression tool), a double-sided 13 mm wrench, a flathead screwdriver, gloves and Can-Am pliers.
How to change a front axle: You’ll need channel locks, needlenose pliers, a flathead screwdriver, a ratchet, a 15 mm end wrench, an 18 mm end wrench, a 16 mm end wrench, a 15 mm socket, an 18 mm socket, a 19 mm socket and a 30 mm socket.
How to change a wheel bearing: You’ll need a 15 mm socket, an 18 mm socket, a 19 mm socket, a 6” extension, 15 mm and 18 mm wrenches, a screwdriver, a rubber hammer, a brass hammer and needlenose pliers.
How to change spark plugs: You’ll need a Torx T30 wrench, a 14 mm deep socket, a 6” extension and a 3/8” ratchet wrench to get the spark plugs out. To remove the exhaust out of the way before reaching the spark plugs, you’ll need a 13 mm wrench, a 13 mm socket, a rubber hose and 2 to 3 feet of wire.
How to change a clutch belt: You’ll need a Can-Am standard tool kit including the Torx T30 wrench, a 13” wrench, a 13 mm socket and the secondary compression tool.
This site stores cookies on your device in order to build a profile of your interests and show you relevant ads on other sites. By continuing to browse this site, you agree to the use and storage of cookies in accordance with our Privacy Policy. You may modify your cookie settings at any time. You may find detailed information about how cookies are used on this site by viewing our Cookie Policy. If you continue to use the website, you agree to the use of cookies.