Step 4: Connect the blue electric cables wire with the blue dot on the winch and do the same for the yellow wire.
Step 5: Apply grease to the connections to seal them off, disengage the winch clutch and pull on the cable to get approximately 30 cm (12 in.) sticking out. Insert the winch from the right side of the vehicle, making sure the yellow clutch control button enters first.
Step 6: Secure the winch to the frame, tighten to specifications, and install the previously removed skid plate.
Step 7: Carry the winch cable through the front skid plate and temporarily remove one of the horizontal rollers so the cable can pass through.
Step 8: Install the winch cable guide, secure it and tighten the nuts. Finally, install the hook assembly and secure it to the cable.