Step 4: Install the electric harness on your ride. Then insert the winch on the left side of the vehicle, making sure that the clutch control button enters first.
Step 5: Connect the wires by pairing the blue taped one to the blue stud, and the yellow one to the yellow stud.
Step 6: Apply some grease to the connections to seal things properly, disengage the winch clutch and pull on the cable until about 30 cm (12 in.) is sticking out.
Step 7: Secure the winch to the front bumper plate, tighten the screws and insert the cable through the front bumper plate using the existing hole and guide rollers.
Step 8: Install the winch cable guide by latching it to the vehicle, tightening the nuts and installing the hook assembly in the cable loop.